Setting The Clock; The Play And Record Timer - Panasonic RX-ES23 Operating Instructions Manual

Setting the Clock

This is a 24-hour clock.
[1] Press [
] to turn the unit on.
[2] Press [CLOCK/TIMER] to select "CLOCK".
Each time you press the button:
n , #
CLOCK ON
#
]
Original display OFF
[3] Within 10 seconds
Turn [TIME/PRESET TUNE
set the time or on remote control, press [–/:]
or [9/+].
[4] Press [CLOCK/TIMER] to start the clock.
The original display is restored shortly after.
Note:
≥
The clock may lose or gain some time over a period.
Readjust if necessary.
To display the clock
Remote control only
Press [DISPLAY].
12
RQT7914
#
PLAY OFF PLAY
#
REC
ON REC
TRACK SKIP
TAPE ⁄ CD

The Play and Record Timer

You can set the timer to come on at a certain time to wake you
up (play timer) or to record a radio station (record timer).
Preparations:
Turn the unit on and set the clock.
For play timer, prepare the music source (tape/CD/radio) for
listening, and set the volume.
]
For record timer, check the cassette's erasure prevention tab
( n
(l 10) and load the cassette with the side for recording facing
up. Tune to the radio station (l 7), and set the volume.
To set the start and finish times
] to
[1] Press [CLOCK/TIMER] to select the desired timer
function.
ON PLAY: to set the play timer
ON REC : to set the record timer
Proceed to step [2] before these indicators stop flashing
(about 10 seconds).
[2] Turn [TIME/PRESET TUNE
set the start time and then press [CLOCK/TIMER].
[3] Turn [TIME/PRESET TUNE
set the finish time and then press [CLOCK/
TIMER].
The start and finish times are now set.
TRACK SKIP ] to
TRACK SKIP ] to