Miscellaneous Settings - Panasonic CZ-RWSU2 Instruction Manual

13. Miscellaneous Settings

A variety of changes can be made to settings, depending on the indoor unit being used.
Wind Direction (fl ap) indicator, operation mode indicator, time display (24 hour, AM/
PM), Heat Max Temp
• For information about the fl ap function, refer to the users' manual of the unit being used.
• (These settings are saved in nonvolatile memory in the remote control, so even when its batteries are changed,
the settings do not have to be made again.)
• First check the display of the remote control when the unit is stopped and then make any desired settings.
How to Operate
• While holding down the buttons below, every time
• Whatever is being displayed when you release
Setting Item
Remote control fl ap
display setting for
when is pressed
Remote control
operation mode
display setting when
is pressed
Clock display setting
Max possible temperature
setting in the Heat mode
Operation Button
Press
while pressing
Press
while pressing
Press
while pressing
Press
while pressing
is pressed the remote control's display changes.
is set.
Setting Content
Models with movable
fl aps
Swing only models
Models w/o lamps
Heat Pump
(with Auto)
Heat Pump
(without Auto)
Dedicated air conditioner
24 Hour
AM/PM
Maximum heating
temperature range is
26 °C – 30 °C
EN-19
Remote Control Display
None
EN