Timer Recording - Panasonic PVQ-1312W Operating Instructions Manual

Timer Recording

You can set up to 8 programs to be recorded while
you are away.
1
Press PROG to display SET PROGRAM
screen.
2
1) Press
SET PROGRAM
T I MER PROGRAMMING T I MER PR OGRAMMING
ON TIMER ON TIMER
2) Press
SELECT :
SET :
END : PROG
• If a program is already in
3
Press
DATE START STOP CH
and
7 FR I --:-- --:-- --
recording DATE.
TODAY
SLP
- - - - - - - - -- - - - - - - -- - - - - - -
• 1~31 = One time
SELE CT START DATE
• DAILY = MON~FRI
SELECT :
SET :
• WEEKLY SUN~SAT
END : PROG / ACT I ON
Example
8 9
31 1
SELECT / Selection Order
Today's
7
Date
WEEKLY WEEKLY
(SAT) (MON)
Repeat step 3 to set:
• start time, stop time
• Channel (or LINE for outside source)
• Speed (SP, LP, SLP)
4 Press PROG (or
P DT START STOP CH SPD
ACTION) to end the
1 day day 9 : 00 00 p 12 12 : 00 00a 08 08 SP SP
2 -- -- : -- -- : -- -- --
program.
3 -- -- : -- -- : -- -- --
4 -- -- : -- -- : -- -- --
To Enter More Programs,
CANCEL : ADD / DLT
SELECT 1 - 8 :
press
ENTER :
END : PROG / ACT I ON
and
program number, and
then repeat step 3.
5
Press PROG twice (or ACTION)
to exit this mode.
• If you're using a cable box, make sure that it is
tuned to the desired channel and the power is
left on for timer recording.
• PROG TIMER indicator lights on the unit.
20
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
to select
TIMER
PROGRAMMING .
to display
screen .
memory, press , and
to select an unused
program number.
to select
or to set the
= Same time once a week
2 6
DAILY
WEEKLY
(SUN)
to select
to set a blank
20
Ready Check List
All connections are made.
Your unit is plugged in.
The clock is set to correct time.
The tape is long enough.
The record tab is in place.
<Model PVQ-2012 unit shown>
POWER VOL CH STOP/EJECT REW/ PLAY/REPEAT FF/ REC TIMER/FM
VIDEO IN AUDIO IN
ACTION
PROG TIMER indicator
Timer Recording Using
unit Buttons
You can set a Timer Recording
using ACTION key on the unit.
(See page 11.)
VOL VOL CH CH STOP/EJECT REW/ STOP/EJECT REW/
ACTION ACTION
Press STOP/EJECT and REW
together without a tape inserted
to display MAIN MENU.
Press + - to select "VCR"
and STOP/EJECT and REW
together to display SET UP
VCR screen.
Press to select "TIMER
PROGRAM" and + to display
the TIMER PROGRAM screen.
Repeat main steps 3 ~ 5.