Enjoying Movies And Music - Panasonic SC-ZT2 Operating Instructions Manual

Enjoying movies and music

• Turn on the TV and switch its input to match the connection (HDMI, for example) using the TV's remote control.
Preparations
• Make sure that the speakers are on. (The following are operations when the unit on/off
Point the remote control at the
signal sensor ( ➜ page 8) on the
main unit of this system.
Note
• See page 29 for digital signals that can be played on this system.
• Depending on the playback signal, you may feel the volume of the bass or surround speakers (not supplied) is not balanced
with the volume of the front speakers. In this case, you can adjust the speaker volume during playback. (➜ page 22)
• Even if you switch input to "TV ", images (or audio) of the equipment connected to BD/DVD IN terminal or AUX1 IN
terminal are output from TO TV (ARC) terminal. When the equipment is connected to both BD/DVD IN terminal and
AUX1 IN terminal, signals of equipment whose input is lastly selected are output.
• When using a DVD recorder with built-in VCR (with the DVD output terminal and DVD/VHS output terminal
mounted), select the input as follows in step 2 above.
To enjoy DVD (when connected to AUX2 IN): select "AUX 2 ".
18
To enjoy video (when connected to AUX3 IN): select "AUX 3 ".
VQT2R71
button is on in Wireless link standby.)
1
2
3
Start play on the connected equipment.
You can enjoy a variety of surround effects. (➜ page 19)
4
After playback, reduce the volume level and turn off.
Operation on the main unit
Press this button to turn on the
system.
To select the source press one of these
buttons.
or
TV
: TV (optical, analogue)
BD/DVD
: Blu-ray Disc player/DVD recorder (HDMI)
AUX 1
: AUX1 IN terminal (HDMI)
AUX 2
: AUX2 IN terminal (optical)
or
AUX 3
: AUX3 IN terminal (analogue)
"AUX 1", "AUX 2", and "AUX 3" switch every time you
press [AUX].
To adjust the volume press these
buttons.
Adjustment range: 0 (Min) to 50 (Max)
1
2
3
4
Turn on the system.
Press
Select the source.
INPUT SELECTOR
Press
(The input source switches each time you
press the button.)
TV : TV (optical, analogue)
BD/DVD : Blu-ray Disc player/DVD recorder (HDMI)
AUX 1 : AUX1 IN terminal (HDMI)
AUX 2
: AUX2 IN terminal (optical)
AUX 3
: AUX3 IN terminal (analogue)
Start play on the connected
equipment.
To adjust the volume.
Turn