Table of Contents
Advertisement
Colour system / Panasonic Auto
Select Signal from the "Setup" menu during AV (S Video) input
signal mode.("Signal [AV]" menu is displayed.)
Mode
Colour system
Set the colour system to match the input signal. If set to "Auto", the colour system
is determined automatically.
Pansonic Auto
Set to "4 : 3" to view 4:3 images in an unchanged format when Panasonic
(4:3)
Auto is selected. If you would like to view 4:3 images in "Just" format, set
to "Just".
Press to select the "Colour System" or "Panasonic
Auto".
Press to select each functions.
If the picture image becomes unstable:
With the system set on Auto, under conditions of
low level or noisy input signals the image may in
rare cases become unstable. Should this occur,
set the system to match the format of the input
signal.
Auto
PAL
Setup for Input Signals
Function
SECAM
M.NTSC
Setup
Component/RGB-in select
Signal
Screensaver
OSD Language
MULTI DISPLAY Setup
Set up TIMER
Press
(Action) button
Signal
3D Y/C Filter ( NTSC )
Colour system
Panasonic Auto ( 4:3 )
NTSC
RGB
English ( UK )
[ AV ]
On
Auto
4 : 3
35
Advertisement
Table of Contents
