Preparing The Remote Control - Panasonic SC-SP100 Operating Instructions Manual

Preparing the remote control

Before using the remote control for the fi rst time,
remove the insulation sheet.
Replace the remote control battery when it stops
operating, or when the range seems reduced.
Rear view
1 Insert an object and push
down to unlock the catch.
Aim at the remote control signal sensor (\ page 10),
avoiding obstacles, at a maximum range of 7 m directly
in front of the main unit.
Lithium Button-Type
battery (CR2025)
Pull
• Do not heat or expose to fl ame.
• Do not leave the battery(ies) in an automobile exposed
to direct sunlight for a long period of time with doors
and windows closed.
• Remove the battery if the remote control is not going
to be used for a long period of time. Store in a cool,
dark place.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type
recommended by the manufacturer. Dispose of used
batteries according to the manufacturer's instructions.
Warning
Risk of fi re, explosion and burns. Do not recharge,
disassemble, heat above 60°C or incinerate.
7