Panasonic Viera TH-42PX600E Operating Instructions Manual page 21

Technical Information
Data format for Card browsing
Photo : Still images recorded with digital still cameras compatible with JPEG fi les of
DCF∗ and EXIF standards
Video : Videos recorded with this TV unit , Panasonic DVD recorder or digital camcorder
Data format : FAT12 or FAT16
Number of pixels
for motion picture : 320 x 240 (QVGA) or 176 x 144 (QCIF)
Max. number of fi les : 65,535
Image resolution : 8 x 8 to 5,120 x 3,840
Sound format : G.726 (32 Kbps, 8-kHz sampling frequency, monaural)
•
Compliant card type (maximum capacity): SD Card (1 GB), Multi Media Card (128 MB), miniSD Card (512 MB)
(requiring miniSD adapter)
•
Check the latest information on the card type at the following website. (English only)
http://panasonic.co.jp/pavc/global/cs
∗DCF (Design rule for camera fi le system): Unifi ed standard established by Japan Electronics and Information Technology Industries Association (JEITA).
Caution
•
A JPEG image modifi ed with a PC cannot be displayed.
•
Images imported from a PC must be compatible with EXIF (Exchangeable Image File) 2.0, 2.1, and 2.2.
•
Partly degraded fi les might be displayed at a reduced resolution.
•
MPEG4 view can only show moving pictures recorded by this unit, Panasonic DVD recorder DIGA or mobile
camera D-snap.
•
When recording in MPEG4, format the SD card with this unit. The card may not operate properly if formatted with
different equipment.
•
Memory cards must be formatted with FAT12 or FAT16 in order to be viewed on TV. If the card is not formatted, it
may cause incompatibility with certain memory card adapters. If this happens, reformat the card using your digital
camera.
Reformatting the card will erase the images and pictures stored in it. Refer to your camera manual for more
information.
•
This function cannot display Motion JPEG and still image not DCF formatted (i.e. TIFF, BMP).
•
The displayed image size depends on the recorded image size.
Note
•
Folder structure viewed in PC
Photo
Created automatically
DCIM
3-digit folder number + 5-digit arbitrary characters
100_PANA
4-digit arbitrary characters + 4-digit fi le number
P1000001.JPG
•
P1000002.JPG
Usable characters: 1-byte "a to z", "A to Z", "0 to 9," and "_"
P1000003.JPG
P1000004.JPG
Video
Created automatically
SD_VIDEO
Created automatically
PRL001
"PRL" + 3-digit arbitrary characters
"MOL" + 3-digit arbitrary characters
MOL001.ASF
•
MOL002.ASF
Usable characters: 1-byte "a to f", "A to F", and "0 to 9"
MOL003.ASF
MOL004.ASF
•
The folder and fi le names may be different depending on the digital camera used.
•
Do not use two-byte characters or other special codes.
•
The card may become unusable with this unit if fi le or folder names are changed.
40
SCART, S-video and HDMI terminal information
■
AV1 SCART terminal
(RGB, VIDEO)
Suitable inputs for AV1 include RGB (Red / Green / Blue).
Socket Earth 21
20 CVBS in (video)
CVBS out (video) 19
18 RGB status earth
CVBS earth 17
16 Status RGB
Red in 15
14 Earth
Red earth 13
12 --
Green in 11
10 --
Green earth 9
8 Status CVBS
Blue in 7
6 Audio in (L)
Blue earth 5
4 Audio earth
Audio out (L) 3
2 Audio in (R)
Audio out (R) 1
■
AV3 SCART terminal
(RGB, VIDEO, S-VIDEO, Q-Link)
AV3 - Pins 15 and 20 are dependent on AV3 S-VHS /
VIDEO switching.
Socket Earth 21
20 CVBS in (video)
CVBS out (video) 19
18 RGB status earth
CVBS earth 17
16 Status RGB
Red in, S.C. - in 15
14 Earth
Red earth 13
12 --
Green in 11
10 Q-Link data
Green earth 9
8 Status CVBS
Blue in 7
6 Audio in (L)
Blue earth 5
4 Audio earth
Audio out (L) 3
2 Audio in (R)
Audio out (R) 1
■
AV2 SCART terminal
(VIDEO, S-VIDEO, Q-Link)
AV2 - Pins 15 and 20 are dependent on AV2 S-VHS /
VIDEO switching.
Socket Earth 21
20 CVBS in (video)
CVBS out (video) 19
18 Earth
CVBS earth 17
16 --
S.C. - in 15
14 Earth
Earth 13
12 --
-- 11
10 Q-Link data
Earth 9
8 Status CVBS
-- 7
6 Audio in (L)
Earth 5
4 Audio earth
Audio out (L) 3
2 Audio in (R)
Audio out (R) 1
■
AV4 S-VIDEO 4 pin terminal
Chrominance in Luminance in
Chrominance earth Luminance earth
■
HDMI terminal
Hot Plug Detect 19
18 +5V Power
DDC/CEC Ground 17
16 SDA
SCL 15
14 Reserved (in cable but N.C. on device)
CEC 13
12 TMDS Clock−
TMDS Clock Shield 11
10 TMDS Clock+
TMDS Data0− 9
8 TMDS Data0 Shield
TMDS Data0+ 7
6 TMDS Data1−
TMDS Data1 Shield 5
4 TMDS Data1+
TMDS Data2− 3
2 TMDS Data2 Shield
TMDS Data2+ 1
41