Table of Contents
Advertisement
Timer programming menu
For an external recording device to record DVB programmes, the integrated DVB system must be active to provide the
signal. The Timer programming menu allows you to choose programmes that you wish to record. At the correct time, the
DVB system will switch on and tune to the correct station (even if the TV is in standby mode). If the recording device is
compatible with Q-Link or similar technologies (see page 32) and connected to the TV's AV2 / AV4 terminal, you do not
need to program the device – the DVB system will control the recording process.
The device must be connected to the TV's AV2 / AV4 terminal using a SCART cable to record DVB programmes.
In DVB mode
Press the MENU button.
Move to Setup menu.
Access Setup menu.
Move to DVB Setup Menu.
Access DVB Setup Menu.
Move to Timer Programming.
Access Timer Programming.
Press the OK button to begin programming.
Select the Programme position to be recorded.
Move to the Date field.
Set the Date on which recording is to take place.
The current Date and Time are shown at the top of the menu.
See page 23 for further Date options.
Move to the Start time field
Move to the End time field
The duration of the recording is shown in the min. column.
The channel position, start and end times can also be input
using the numeric buttons on the remote control.
Move to the Subtitles field.
If you wish to record subtitles (if available) select Auto.
Press the OK button to store.
Press the EXIT button to leave the DVB Timer Programming screen.
Notes:
• To delete a timer programme, select the recording with the cursor bar and press the Red button.
• To edit a previously entered timer programme, select it with the cursor bar and press the OK button.
• Timer programmes can also be entered from the TV Guide. See page 30.
Two minutes before the recording is due to start, a reminder will appear on screen:
Press the OK button to remove the reminder from the screen.
If you wish to cancel the recording, press the EXIT button.
Note: The above 2 operations will not be necessary if the TV set is in standby mode.
Notes:
Six seconds before the recording is due to start the DVB system will tune to the correct station. If you were already watching another
DVB station you will see the station change on screen. If you were watching an analogue channel, you will not see the change.
You can continue to watch analogue stations while a timer recording is in progress.
If you attempt to switch to another DVB programme position while a timer recording is in progress the message "DVB Tuner Locked "
will be displayed. Press the OK button to continue recording, or EXIT to unlock the programme position. Beware that if you press EXIT,
timer programming for this DVB position will be immediately deleted.
To immediately cancel a recording that is already in progress, press GUIDE then EXIT.
You may not be able to cancel recording just before it starts. Use the recording device to cancel it.
22
and set the Start time
and set the End time
(DVB mode)
MENU
OK
DVB Setup menu
Timer Programming
Profile Edit
Child Lock
DVB Tuning Menu
DVB System Setup
Multi Audio
.
DVB Timer Programming
.
Pos. Name
1
1
2
3
3
40
4
5
6
33
92
7
8
9
46
0
18
VCR
5
OK
EXIT
OK
EXIT
MODE
OK
1
2
3
4
5
6
7
8
9
C
0
N
IDTV
Access
eng
Thu 05/08/04 18:49
Date
Star t
End
BBC1
6/8 FR
18:00
20:00
ITV1
7/8 SA
21:30
22:30
BBC News 24
8/8 SU
15:30
16:45
Boomerang
9/8 MO
23:10
24:30
Kerrang!
10/8 TU
20:00
22:00
The Community Channel
11/8 WE
19:30
21:30
The Hits
12/8 TH
16:00
18:00
Five
13/8 FR
19:00
20:00
Select timer
Edit timer
0
9
Exit
Return
Delete
min.
120
Off
60
Off
75
Off
80
Off
120
Off
120
Off
120
Off
60
Off
Hide quick links:
Advertisement
Table of Contents
