Update Channel List; New Channel Message; Signal Condition - Panasonic TX-L32E6E User Manual

– SC3: PAL D, K / SECAM D, K
– F: SECAM L, L'
1. Select the channel position with numeric buttons
2. Select the channel with Channel Up / Down button
3. Search with /
4. Select Store with
Use Fine Tuning to make small adjustments to the tuning of an individual
●
programme (affected by weather conditions, etc.).
If a VCR is connected only with the RF cable, select channel position 0.
●

Update Channel List

By updating the DVB channel list, you can add new channels, delete removed
channels or change channel names and positions automatically.
The channel list is updated while keeping your settings in
●
Channel List, Child
Depending on the signal condition, the update may not work properly.
●

New Channel Message

Selects whether to give a notification message when a new DVB channel is
found or not.
When a notification message appears, you can perform
●
List pressing OK.

Signal Condition

Selects a channel and checks the signal condition.
A good Signal Strength is not an indication of suitable signal for DVB reception.
Use the Signal Quality indicator as follows.
●
– Green bar: Good
– Yellow bar: Poor
– Red bar: Bad (Check the terrestrial aerial or cable)
Vertical lines show the maximum signal value of the selected channel.
●
To change the channel
●
/ and press OK to set
Lock, etc.
- 45 -
Favourites Edit,
Update Channel