3D Settings - Panasonic TX-P42ST60B User Manual

2D 3D:
Converts 2D images into 3D.
Please note the 3D images appear slightly different from the originals.
●
Using this function for profit-making purposes, or publically showing
●
images converted from 2D to 3D in places such as shops or hotels
etc. may infringe on the rights of the copyright holder protected under
copyright law.

3D Settings

1. Display the menu with
2. Select Picture
3. Select one of the following items with
3D Detection / 3D Signal Message
3D Adjustment / L/R Picture Swap
4. Set with / /
To exit the menu screen
●
EXIT
3D Detection
(On (Advance) / On
Selects whether to switch to the 3D mode automatically or not.
On (Advance):
Detects all the 3D format signals and displays the 3D image
automatically.
On:
Detects the particular 3D format signals (Frame Sequential, etc.) and
displays the 3D image automatically.
To view 3D images without any notifications and operations, set to
●
(Advance).
3D Signal Message
(On / Off)
Selects whether to give a notification message when a signal of 3D format is
found or not.
Not valid when 3D Detection
●
For DVB, Component and HDMI input
●
MENU
3D Settings with /
/ 3D Refresh Rate
/ Edge Smoother
/ and press OK
/ Off)
is set to
- 48 -
and press OK to access
/ and press OK
/ 2D 3D Depth
/ Safety Precautions
to store
On (Advance)
to access
/
On