Securing The Tv - Panasonic Viera TX-P42GT20B Operating Instructions Manual

To help avoid risk of damage or injury by the TV tipping or falling, please follow the warnings and
cautions below:
Warning
●
Do not disassemble or modify the pedestal.
Caution
●
Do not use with any other TVs or displays.
●
Do not use the pedestal if it becomes warped or physically damaged. If this occurs, contact your nearest
Panasonic dealer immediately.
●
During setup, make sure that all screws are securely tightened.
●
Ensure that the TV does not suffer any impact during installation of the pedestal.
●
Ensure that children do not climb onto the pedestal.
●
Install or remove the TV from the pedestal with at least two people.
Assembly screw (3)
(silver)
●
XYN5+F18FN
M5 × 18
■
Assembling the pedestal
Use the assembly screws
the base securely.
●
Make sure that the screws are securely tightened.
●
Forcing the assembly screws the wrong way will strip
the threads.
■

Securing the TV

Use the assembly screws
●
Tighten the four assembly screws loosely at first,
then tighten them firmly to fix securely.
●
Carry out the work on a horizontal and level surface.
To remove the pedestal
When removing the pedestal from the TV, remove the
assembly screws first, and then, pull out the TV
from the pedestal.
Caution
●
Do not remove the assembly screws
removing the pedestal from the TV to prevent falling
over.
Attaching / removing the pedestal
Assembly screw (4)
(black)
●
THEL080N
M5 × 30
to fasten the pole to
to fasten securely.
before
Pole
●
TBLA3828
D
B
Hole for pedestal
installation
(View from the bottom)
Base
●
TBLX0184
A
Front
Arrow mark
D
7