Hanns.G HG221A User Manual page 16

User's Manual
SYSTEM
AUDIO INPUT
VOLUME
MUTE
DDC/CI
FACTORY RESET
INFORMATION
While transferring via the HDMI port, it is recommended to set
AUDIO INPUT to HDMI; if no sound is outputted, it is
recommended to select AUDIO INPUT as PC, and make sure the
PC audio output cable is connected to monitor's LINE IN (or
AUDIO IN) port. [For HDMI Input only]
Select the 「VOLUME」 option to change the volume level. Enter
the option and adjust the level.
Select the「MUTE」option to switch the function On or Off.
Select the 「DDC/CI」option to switch the function On or Off.
[Dual input mode optional]
Select the 「FACTORY RESET」option to reset to the monitor's
default setting. This will erase the current settings. Enter the
option and select On or Off.
Display Horizontal frequency/Vertical frequency/Resolution
information.
16