Initial Setup - Panasonic PV-DF2002 Operating Instructions Manual

Initial Setup (Ready to Play)
Please make all cable or antenna connections before powering on.
Initial Setup (Ready to Play)
Press on the remote for TV-VCR mode.
1
Plug the unit power cord into an AC wall outlet.
2
Press Power* on the remote or unit. The unit
comes on and auto channel and clock set starts.
CH AUTO SET PROCEEDING
• If you use a cable box, turn it on and set it to the Public
Broadcasting Service (PBS) channel in your time zone.
If you use a DSS receiver, it must be turned off.
AUTO CLOCK SET
PROCEEDING
CANCEL : PRESS STOP KEY
3
Settings are made automatically.
When setup is done, this screen appears.
2 / 6 / 2002 WED 12 : 00PM
DST : ON
SETT I NG : CH 1 0
AUTO CLOCK SET
COMPLETED
If AUTO CLOCK SET IS INCOMPLETE
screen appears, set the clock using MANUAL
CLOCK SET procedure on next page.
SET CLOCK
: :
2 / 6/ 2 / 6/ 2002 WED 2002 WED 12 12 00 00PM PM
DST : ON
SE SET T COMPLETED COMPLETED
SET : SET BACK:
START : ACT I ON
14
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
POWER
TV-VCR
SELECT
SET
ACTION