Panasonic TX-L42ET60E User Manual page 138

Favourite Network
Selects your favourite network for each broadcasters (only available in some
countries).
For DVB mode
●
New Channel Message
(On / Off)
Selects whether to give a notification message when a new channel is found
or not.
Watching
For DVB mode
●
Service Replacement
(On / Off)
Set to On to display a message to switch to the available service (only
available in some countries).
For DVB-C mode
●
Signal Condition
Checks the signal condition.
Watching
Not valid in Analogue mode
●
Attenuator
(On / Off)
Automatically reduces the DVB-C signal to avoid the interference.
If the DVB-C signal is too strong, the interference may occur. In this case,
●
set to On to weaken the signal automatically.
Add TV Signal
Adds the TV mode.
This function is available if you skip any modes to tune in
●
first using the TV.
= Note =
The settings in Tuning Menu
●
The menu name varies depending on the TV mode.
Tuning and editing channels
Tuning and editing channels
are applicable only for the selected TV mode.
- 138 -
New Channel Message
Signal Condition
Auto Setup
(DVB-C Tuning Menu
for