Image Stabilizer Function - Panasonic HDC-SD1 Operating Instructions Manual

Red eye reduction function
Reduces the phenomena where human eyes
become red from flashes.
1
Press the cursor button. Then
move the cursor button down to
display the icon shown in the
illustration.
2
Move the cursor button right to
select [ ].
≥The flash is activated 2 times. Do not move
until the second flash is finished.
≥Use this when you take pictures of people in
dark places.
≥Red eye phenomenon may appear depending
on the recording conditions.
To adjust the brightness of the
flash
Press the MENU button, then select
[PICTURE] [FLASH LEVEL]
>
desired item and press the cursor
button.
[ßj]: If the brightness is too high.
[ßd0]: In normal recording
[ßi]: If the brightness is insufficient.

Image stabilizer function

This is for reducing image shakes
during recording.
Reduces the image shaking due to hand
movement when recording.
Rotate the mode dial to select
¬
Press the MENU button, then select
[BASIC]
the cursor button.
To cancel the image stabilizer function
Press the MENU button, then select [BASIC] #
[O.I.S.] # [OFF] and press the cursor button.
≥This function's default setting is [ON].
≥In still picture recording mode, pressing the
PHOTO SHOT button halfway increases the
effect of the image stabilizer function. (MEGA
optical image stabilizer)
≥In the following cases, the image stabilizer
function may not work effectively.
– When the digital zoom is used
– When the unit is shaken greatly
– When you record a moving subject while
tracking it
#
[O.I.S.] [ON] and press
# #
Recording
.
57
VQT1D38