Panasonic HDC-SD1 Operating Instructions Manual page 109

CANNOT PROTECT.
CANNOT RECORD IN AGS
MODE.
PUSH THE RESET
SWITCH.
CANNOT SET.
CHANGE MODE TO USE
USB.
DISCONNECT USB
CABLE.
PLEASE CONNECT AC
ADAPTOR AND BATTERY.
RECONNECT USB CABLE.
DISCONNECT USB
CABLE.
DISCONNECT USB
CABLE.
Scenes on SD cards for which the top menu has been created with
HD Writer Ver1.0E for SD1 cannot be protected. (l 73)
The AGS function is activated. (l 42)
An irregularity in the unit has been detected. Press the RESET
button to restart the unit. (l 116)
The [GUIDE LINES], [ZEBRA], [MF ASSIST] and [MIC LEVEL]
menu settings cannot be set when the colour bar is set.
The USB cable is connected in recording mode.
You are attempting to switch the mode dial from PC Connection
mode to another mode with the USB cable connected.
You are attempting to connect to a computer in PC Connection
mode when the AC adaptor is not connected or the battery is not
inserted.
Disconnect the USB cable, then connect the AC adaptor with the
battery inserted in this unit and reconnect the USB cable.
The unit cannot correctly establish the connection to the computer
or printer. Disconnect and then reconnect the USB cable.
When the unit is connected to a computer, its power cannot be
turned off.
Others
109
VQT1D38