Tape Operation; Index Search; Program End Search - Panasonic PV-C2022 Operating Instructions Manual

Tape Operation

Search System is ...
Each time a recording is made, an invisible index mark is placed on the tape.
When timer recordings are made, program index and information are also included.
These index marks can be used to access or scan recordings.

Index Search

Go directly to the desired recording.
1
Press SEARCH*
I NDEX SEARCH
in Playback or
ENTER I NDEX NUMBER : 1
US I NG 1- 9 KEYS
Stop mode to
display INDEX
FORWARD SEARCH : FF
REVERSE SEARCH : REW SEARCH screen,
NEXT : SEARCH
EX I T : STOP and then press
NUMBER Keys to
select the
recording number.
• To calculate number,
see below.
Press FF or REW
to start search.
2
Play begins at
I NDEX SEARCH
search end. To
search forward or
back 1 index,
press FF or REW
FORWARD SEARCH : FF
REVERSE SEARCH : REW
while screen left in
displayed (10 sec.).
I I I I I To calculate the Index Number
Example 1:
To go to rec. 2 from rec. 4, enter 3 and press REW.
1 2 3 4 5
Example 2:
To go to rec. 6 from rec. 2, enter 4 and press FF.
1 2 3 4 5
NOTE: indicates start points of each recording.
Notes
• Make each entry within 10 seconds, or the Index
Search mode will be canceled.
• If Index Search is started very close to an index
mark, that index mark may not be counted in the
search.
24
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
LSQT0517A_22p31.p65

Program End Search

Locates end point of recording for continuity.
1
Press SEARCH twice in Playback
or Stop mode to display
PROGRAM END SEARCH screen
.
2
PROGRAM END SEARCH
SEARCH START
EX I T
Example of Program End Search operation.
Fig.1
Press SEARCH button
Fig.2
Program 1
Press SEARCH button
Fig.3
If search exceeds a few seconds in BLANK area.
Program 1
End Point
6 7
Upon locating end point...
The unit searches slightly past end point,
reverse searches, and plays the last few
seconds of the program, then stops.
6 7 Press SEARCH button
Notes
• If Program End Search is started very
close to an index mark, that mark may be
skipped over.
• To cancel, press PLAY or STOP.
24
Press FF to
start search.
: FF
: SEARCH
PLAYBACK DIRECTION
Program 1 Program 2 or BLANK
End Point
FF
BLANK Program 2 BLANK
End Point
FF
Press SEARCH button
BLANK Program 2
FF
11/20/2001, 9:33 AM