LG 42PT2 Owner's Manual page 102

aPPENdix
08. Colour (Command: k i)
► To adjust the screen colour.
You can also adjust colour in the PICTURE menu.
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
* Refer to 'Real data mapping 1'. See page 87.
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
09. Tint (Command: k j)
► To adjust the screen tint.
You can also adjust tint in the PICTURE menu.
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data Red : 00 to Green : 64
* Refer to 'Real data mapping 1'. See page 87.
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
10. Sharpness (Command: k k)
► To adjust the screen sharpness.
You can also adjust sharpness in the PICTURE menu.
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
* Refer to 'Real data mapping 1'. See page 87.
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
11. OSd Select (Command: k l)
► To select OSD (On Screen Display) on/off when
controlling remotely.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data 00 : OSD off
Acknowledgement
[l][ ][Set ID][ ][OK/NG][Data][x]
12. remote control lock / Key lock mode
(Command: k m)
► To lock the remote control and the front panel controls
on the set.
(If you're not using the remote control and front panel
controls on the TV, use this mode. When main power
is on/off, remote control lock is released.)
86
01 : OSD on
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Data 00 : Lock off
Acknowledgement
[m][ ][Set ID][ ][OK/NG][Data][x]
13. Balance (Command: k t)
► To adjust balance.
You can also adjust balance. in the AUDIO menu.
Transmission
[k][r][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
* Refer to 'Real data mapping 1'. See page 87.
Acknowledgement
[t][ ][Set ID][ ][OK/NG][Data][x]
14. Colour Temperature (Command: x u)
► To adjust colour temperature.
You can also adjust Colour Temperature in the
PICTURE menu.
Transmission
[x][u][ ][Set ID][ ][Data][Cr]
Data W50 : 00 to C50 : 64
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
15. Treble (Command: k r)
► To adjust Treble.
Transmission
[k][r][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
* Refer to 'Real data mapping 1'. See page 87.
Acknowledgement
[r][ ][Set ID][ ][OK/NG][Data][x]
16. Bass (Command: k s)
► To adjust bass
Transmission
[k][s][ ][Set ID][ ][Data][Cr]
Data Min: 00 to Max: 64
* Refer to 'Real data mapping 1'. See page 87.
Acknowledgement
[s][ ][Set ID][ ][OK/NG][Data][x]
01 : Lock on