Setting Up - LG MCD23 Quick Manual

Setting up

1 Connect the speaker cables to the player 1
Cables from the left-hand speaker connect to the terminal
marked L (left) + (plus) and - (minus).
Cables from the right-hand speaker are connected to the
terminal marked R (right) + (plus) and - (minus)
To connect the cable to the player, press each of the four
square plastic finger pads on the rear of the player.
The connector will open ready to receive a cable.
Be careful of the following
Be careful to make sure children not to put their hands or any objects into the
*speaker duct.
*speaker duct : A hole in speaker cabinet (enclosure) that gives plentiful bass sound.
6
Put the battery in the remote control
Make sure that the + (plus) and - (minus) on the battery
(size AAA) match those on the remote control
2 Fit the AM loop aerial to its stand 2
Connect the AM loop aerial to the player.
3 Connect the FM aerial 3
The reception will be at its best when the two loose ends of the
aerial are in a straight line and horizontal.
4 Plug the power plug into a wall socket 4
.