Hand Held Products Hand Held Computer Dolphin 7450 User Manual page 63

In the "Locate Drive Files" dialog, check the CD-ROM drives check box and insert the driver CD provided into the CD tray on
your PC. There are sub-directories in this directory for each type of Windows OS supported. Select stirusb.sys file in the correct
sub-directory for your PC:
• w2k - Windows 2000
• win98 - Windows 98
• winme - Windows Me
At this point, the hardware is installed and operating. You may need to reset your PC to complete the installation process. You
can verify that the USB driver is functioning by watching the COMM LED on the USB home base. It should be flashing red
approximately every three seconds.
Once the USB HomeBase is installed, you can use ActiveSync to connect to a Dolphin 7400. These instructions assume that
ActiveSync v3.1 is installed on your PC.
In the ActiveSync connection settings, add check mark to "Allow serial cable or infrared connection to this COM port" and select
"Infrared Port (IR)" for the COM port as shown below. Do not check "Allow USB connection with this desktop computer". It has
no effect for the USB HomeBase.
6 - 13