Before Requesting Service - Panasonic PV-20DF64-K Operating Instructions Manual

Before Requesting Service

Check the following points once again if you are having trouble with your unit.
PROBLEM
No power...
Power turns itself off...
No picture or sound...
Poor picture with
normal sound...
Poor sound with normal
picture...
Poor TV reception...
No colour or poor
colour...
Ghost (multiple)
images...
TV programs cannot
be watched...
Unit cannot be
controlled...
ACTION, PLAY,
SELECT, SET
POWER, etc. buttons
cannot be selected...
60
CORRECTION
Completely insert Power Plug into an AC outlet.
Set POWER button to ON.
Auto power-off (shut off) occurs after about 5 min. in DVD mode
with no operation, or if there is no broadcast signal in TV or
Playback mode. Turn the power back on.
Make sure your antenna system (TV or CABLE) is correctly set.
Completely insert Power Plug into an AC outlet.
Set POWER button to ON.
Adjust BRIGHTNESS, SHARPNESS, and PICTURE controls in
the SET UP Video Adjustment.
Adjust VOLUME control.
Adjust SHARPNESS and PICTURE controls in the SET UP Video
Adjustment.
Adjust TINT and COLOR controls in the SET UP Video
Adjustment.
Install a directional antenna.
Make sure the selected channel is in unit's memory.
Aim Remote directly at the remote sensor on the unit. Avoid any
object blocking signal path.
Inspect the remote batteries.
Exposing unit remote sensor to direct fluorescent or outdoor light
may cause signal interference.
Press TV for TV mode.
Press DVD for DVD mode.
Check remote batteries.
Page
13
11-12
37-38
14
13
11-12
28-29
22
28-29
28-29
14
19
12
8
12
12
12
8