Rear Panel - Panasonic AG-DTL1E Operating Insructions

Parts and their functions

Rear panel

2
1 2
75™
ON ON
OFF
RS-
1 2 OFF
232C
75™
9 10
MIC IN
IN
REMOTE
OUT
S-VIDEO
OUT
AUDIO
4 5 6
3
1 CAMERA IN connectors 1 to qV (BNC),
75Ω termination/loop through selector switches
1 to 8 , 75Ω termination switches 9 to qV
The camera and other external video input signals
(max. 16 inputs) are connected to these
connectors.
To use these connectors, select REC TYPE as the
RECORDING T-MODE & CAMERA setting on
menu screen P3.
<Note>
The 75Ω termination/loop through selector switches
1 to 8 have 3 positions.
Switches 9 to qV have 2 positions, 75 Ω termination
ON and OFF.
2 RS-232C connector
This is used to connect a personal computer or
other such device for controlling the unit.
3 MIC IN jack (M3)
This is used to connect the audio input signals from
the microphone. (600Ω impedance)
4 REMOTE connector
This is used to connect the model AG-A11 remote
controller available as an optional accessory.
5 AUDIO connectors (pin jacks)
These are the audio input and output connectors.
When a microphone has been connected to the
MIC IN jack, the sound from this jack takes
precedence in recording.
1
CAMERA IN
3 4 5 6 7 8
75™ 75™ 75™
ON ON ON ON ON
OFF OFF OFF
3 4 OFF 5 6 OFF 7 8
75™ 75™
11 12 13 14 15 16
1 2 GND IN OUT WARNING EXT SW IN VIDEO OUT
/REC OUT /VIDEO OUT
IN RESET OUT
EXT
TIMER TAPE END OUT
ALARM GND
REC IN GND TIME ADJ IN
7 8
ON
OFF
75™
9
6 S-VIDEO OUT connector (4P)
This is used to connect the unit to a device
equipped with an S-video input connector.
7 Terminal section
8 EXT SW IN/VIDEO OUT connector (BNC)
The same video signals are output as the signals
from the VIDEO OUT connector 9. When EXT SW
IN is selected as the EXT SWITCHER MODE
setting on menu screen P7, the connector can be
made to serve as an input connector of the external
switcher.
9 VIDEO OUT connector (BNC)
The video signals from the camera switched by the
internal sequential switcher are output from this
connector during recording.
During playback, the playback pictures of the
recorded tape are output.
The menu screen or time adjustment screen is also
displayed.
: AC IN socket
One end of the accessory power cord is connected
to this socket, and the other end is connected to a
household AC 220—240 V power outlet.
10 (E)
:
~ AC IN