LG 26LX2R Owner's Manual page 53

Set ID
Set ID
- Use this function to specify a TV ID number.
- Refer to 'Real Data Mapping'. See page 54.
1. Press the MENU button and then use
menu.
2. Press the G G button and then use
3. Press the button and then use
G G
choose the desired TV ID number. The adjustment range of
is 1 ~ 99.
4. Press EXIT button to return to normal TV viewing.
Communication Parameters
Communication Parameters
• Baud rate : 9600 bps (UART)
• Data length : 8 bits
• Parity : None
• Stop bit : 1 bit
• Communication code : ASCII code
* Use a crossed (reverse) cable.
Command Reference List
Command Reference List
COMMAND 1 COMMAND 2
01. Power
02. Input Select (Main Picture) x
03. Input Select (Sub Picture) x
04. Aspect Ratio
05. Screen Mute
06. Volume Mute
07. Volume Control
08. Contrast
09. Brightness
10. Color
11. Tint
12. Sharpness
13. OSD Select
14. Key Lock
15. Balance
16. Key
*
: Refer to '02~03 Input select'. See page 54.
button to select the
D D / E E
button to select
D D / E E
button to adjust
D D / E E
DATA
(Hexadecimal)
k a 0 ~ 1
*
b
y *
k c 0 ~ 3
k d 0 ~ 1
k e 0 ~ 1
k f 0 ~ 64
k g 0 ~ 64
k h 0 ~ 64
k i 0 ~ 64
k j 0 ~ 64
k k 0 ~ 64
k l 0 ~ 1
k m 0 ~ 1
k t 0 ~ 64
m c Key Code
Language
Key lock
Set ID
Caption/Text
.
to
Front light
Menu
T ransmission / Receiving Protocol
T ransmission / Receiving Protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
* [Command 1]: First command. (k, x or m)
* [Command 2]: Second command.
* [Set ID]: You can adjust the set ID to choose desired moni-
tor ID number in Special menu. Adjustment range
is 1 ~ 99. When selecting Set ID '0', every con-
nected TV set is controlled. Set ID is indicated as
decimal (1~99) on menu and as Hexa decimal
(0x0~0x63) on transmission/receiving protocol.
* [DATA]: To transmit command data.
Transmit 'FF' data to read status of command.
* [Cr]: Carriage Return
ASCII code '0x0D'
* [ ]: ASCII code 'space (0x20)'
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
* The Monitor transmits ACK (acknowledgement) based on
this format when receiving normal data. At this time, if the
data is data read mode, it indicates present status data. If
the data is data write mode, it returns the data of the PC
computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
* The Monitor transmits ACK (acknowledgement) based on
this format when receiving abnormal data from non-viable
functions or communication errors.
Data 1: Illegal Code
2: Not supported function
**Error messages
1. Illegal ID : If Wrong or no ID in the command is written.
2. B_TokenLength !=2 : If the first argument of the command
does not equals to 2.
3. Error ==TOKEN_ERROR : If some Special character or
Numeric are written to the first argument of the command
or wrong Space position is written to the first argument of
the command.
4. Illegal Opcodes : If the Wrong Alphabet is written to the
first argument of the command.
5. Illegal Params : If the Wrong parameter is supplied to the
end of the command line (means that value of the parame-
ter that is not supported).
Reference
SPECIAL
1
G
Demo
Prev.
53