Basic Operation - LG 26LX2R Owner's Manual

Operation
Operation

Basic operation

Basic operation
1. First, connect power cord correctly. At this moment, the TV switches to standby mode.
Press the ON/OFF, INPUT, CH
(0 ~ 9) button on the remote control and then the TV will turn on.
2. Select the viewing source by using INPUT button on the remote control.
This TV is programmed to remember which power state it was last set to, even if the power cord is out.
3. When finished using the TV, press the POWER button on the remote control. The TV reverts to standby mode.
1. Press the VOL
D D / E E
2. If you want to switch the sound off, press the MUTE button.
3. You can cancel this function by pressing the MUTE or VOL
CH
Press the or NUMBER buttons to select a channel number.
D D E E
/
• If you intend to be away on vacation, disconnect the power plug from the wall power outlet.
- The menus can be shown on the
screen in the selected language.
First select your language.
Turning on the TV
button on the TV or press the POWER, TV, INPUT, CH
D D E E
/
Volume Adjustment
button to adjust the volume.
Channel Selection
Menu Language Selection
1
Press the MENU button and then use
menu.
2
Press the
Press the
3
language. From this point on, the on-screen menus will be shown in the
selected language of your choice.
4 Press the EXIT button to save and return to TV viewing.
button.
D D E E
/
G G button and then use
G G button and then use
, Number
D D E E
/
button to select the
D D / E E
button to select
D D / E E
button to select your desired
D D E E
/
Operation
.
27