Special Features; Remote Warning Feature; Auto Operation Functions - Panasonic PV-20DF63 Operating Instructions Manual

Special Features

Remote Warning Feature

When Universal Remote Control (page 26) is used,
and this feature is set to "ON," a warning appears
whenever an invalid key is pressed in DSS or
Cable mode.
Press ACTION* to display MAIN MENU.
1
2
M A I N MENU
DVD LOCK
TV CLOCK
SELECT :
END : ACT I ON
3
SET UP TV
CAPT I ON
I NPUT SELECT
SET UP V I DEO / AUD I O
DVD VOL ADJUST : + 2
FM ANTENNA
REMOTE WARNING
SELECT :
END : ACT I ON
"REMOTE WARNING : OFF"
•
➞ Remote warning will not appear even if
invalid key is pressed.
Press ACTION twice to return to the
4
normal screen.
Selecting Input Mode
Method 1:
Press CH . The display will change as
follows.
Method 2:
a Press ACTION for MAIN MENU.
b Press to select "TV," then press SET
for SET UP TV screen.
c Press to select "INPUT SELECT," and
then press SET to select "TUNER," "LINE1" or
"LINE2."
d Press ACTION twice to exit this mode.
28 28
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
1) Press
to select "TV."
2) Press SET to
LANGUAGE
display SETUP
1
3
5
TV screen.
CH
SET : SET
1) Press to
select
REMOTE
: TUNER
WARNING.
: I NT
2) Press SET to
: ON
set "ON" or
SET : SET
"OFF."
1 2 3
LINE2
(CABLE)
(TV)
LINE1 125 or 69
Weak Signal Display Feature
When "ON" is selected, the picture is displayed
even when a broadcast signal is weak or
non-existent.
Press ACTION to display MAIN MENU.
1
2
M A I N MENU
DVD LOCK LANGUAGE
1
3
5
TV CLOCK CH
SELECT : SET : SET
END : ACT I ON
3
SET UP CHANNEL
ANTENNA : CABLE
AUTO SET
WEAK S I GNAL D I SPLAY : OFF
SELECT :
SET : SET
END : ACT I ON
Notes
• "ON" = Picture is displayed regardless of signal
condition, and may not always be clearly
visible.
"OFF" = Screen turns solid blue when signal is absent
or weak.
• If unit is connected to equipment which has blue back
feature, selecting "ON" will have no effect on the other
equipment.
Press ACTION twice to return to the
4
normal screen.

Auto Operation Functions

■ Auto Shut Off
No broadcast signal in TV mode (Only when Weak
Signal Display is set to OFF.), DVD stops for 5
minutes.
➞ Power turns off
• This feature is canceled if any button is pressed
during above conditions.
1) Press
to select
"CH."
2) Press SET to
display SET
UP CHANNEL
screen.
1) Press to
select WEAK
SIGNAL
DISPLAY.
2) Press SET to
set "ON" or
"OFF."