Vcr Status & Clock Display; Blue Screen Display; Warning And Instruction Displays; On-Screen Displays (Osd) - Panasonic AG-513E Operating Instructions Manual

On-Screen Displays (OSD)

VCR Status & Clock Display
Press DISPLAY
to display or remove the overlay.
Function Status
Current Time
Rec Time Remaining
REC 1 2 : 0 0PM
(OTR mode only,
0 : 25
see page 14.)
12 / 2 4 / 2 0 0 1 MON
12 : 0 0PM -
CH 0 8 ABC ABC
Time Stamp Data (See page 31.)

Warning and Instruction Displays

OSD
NO CH FOUND PLEASE CHECK
ANTENNA CABLE CONNECTION THEN
PUSH CH UP KEY AGAIN
PLEASE SET CLOCK BEFORE
PROGRAMMING
CHECK CASSETTE RECORD TAB
TO CANCEL TIMER REC HOLD DOWN
STOP KEY FOR APPROX 3 SEC
NO CASSETTE
PLEASE INSERT A CASSETTE
PLEASE PREPARE FOR TIMER REC
VIDEO HEADS MAY NEED CLEANING
PLEASE INSERT HEAD CLEANING
CASSETTE OR REFER TO MANUAL
END: PLAY KEY
VCR LOCK ACTIVATED
36

Blue Screen Display

Whenever a blank section of a
tape comes up in Play mode, or
when the selected channel has no
broadcast signal with the Weak
Channel Caption
Signal Display Feature set to
(See pages 28, 29.)
"OFF" (see page 30), the screen
will turn solid blue.
Channel & Function Display
ABC When a function button is pressed
Counter
-0 : 1 2 : 3 4
(PLAY, FF, etc.) or you change
SP
channels, the unit mode or channel
Tape Speed
number will be displayed. (Some
(See page 4.)
1 : 0 0PM
station names may also appear if
MOV I E
Channel Caption is set. See pages
28 and 29.)
These displays will alert you to a missed
operation or provide further instructions.
Caution
• If no active channels are found for CHANNEL
MEMORY...
• If you attempt to set or review a Timer Recording,
or set the On-Timer and the Clock is not set...
• If you press REC, and a cassette is inserted with
no record tab...
• If you press STOP during a Timer Recording...
• If you press PLAY, FF, REW, or REC without a
cassette inserted...
• If the unit is not in Stop mode or a cassette with
record tab is not inserted two minutes before a
Timer Recording is about to begin...
• If head cleaning becomes necessary while
playing back a tape...
• If you press a function button other than STOP/
EJECT or POWER while the unit is in VCR Lock
mode...
0 8
ABC
Page
8, 10, 12
12, 13
4, 14
23
14
22, 23
4
30