On-Screen Display (Osd); Vcr Status & Clock Display; Blue Screen Display; Warning And Instruction Displays - Panasonic PV C2023 Operating Instructions Manual

On-Screen Display (OSD)

VCR Status & Clock Display
Press DISPLAY to display or remove
the overlay.
Function Status
Rec Time
Remaining
(OTR mode
only, see
page 12.)

Warning and Instruction Displays

OSD
PLEASE SET CLOCK BY
PRESSING ACTION KEY
CHECK CASSETTE RECORD TAB
TO CANCEL TIMER REC HOLD
DOWN STOP KEY FOR APPROX 3
SEC
NO CASSETTE
PLEASE PREPARE FOR TIM ER
REC
VIDEO HEADS MAY NEED
CLEANING PLEASE INSERT HEAD
CLEANING CASSETTE OR REFER
TO MANUAL
VCR LOCK ACTIVATED
32 32
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
Channel
Current Time
CH08
REC 1 2 : 0 0PM
-0 : 1 2 : 3 4
0 : 25
SP
NO V-CHIP DATA
Tape Speed
If you attempt to set or review a Timer Recording, or
set the On-Timer and the Clock is not set...
If you press REC, and a cassette is inserted with no
record tab...
If you press STOP during a Timer Recording...
If you press PLAY, FF, REW, or REC without a
cassette inserted...
If the unit is not in Stop mode or a cassette with
record tab is not inserted two minutes before a Timer
Recording is about to begin...
If head cleaning becomes necessary while playing
back a tape...
END: PLAY
If you press a function button other than STOP/EJECT or
POWER while the unit is in VCR Lock mode...

Blue Screen Display

Whenever a blank section of a tape comes up in
Play mode, or when the selected channel has no
broadcast signal with the Weak Signal Display set
to "OFF" (see page 28), the screen will turn solid
blue.
Counter
Channel & Function Display
When a function button is pressed (PLAY, FF, etc.)
or you change channels, the unit mode or channel
number will be displayed.
These displays will alert you to a missed
operation or provide further instructions.
CAUTION
CH 08
Page
8 - 11
3, 12
23
12
22 - 23
4
28