Programming The Remote Control - LG 32LX1R Series Owner's Manual

Reference
Reference

Programming the Remote control

Programming the Remote control
TV INPUT
POWER
DVD
MODE
CABLE
ARC
OK
VOL
MUTE LIST PR
1 2 3
4 5 6
7 8 9
0
FAVOURITE Q.VIEW
SIZE POSITION
INDEX HOLD
i
TIME REVEAL MODE
MIX
? M
54
The remote control is a multi-brand or universal remote control. It can be pro-
grammed to operate most remote-controllable devices of other manufacturers.
Note that the remote control may not control all models of other brands.
Programming a code into a remote mode
1. Test your remote control.
To find out whether your remote control can operate the component without pro-
gramming, turn on the component such as a VCR and press the corresponding
mode button (such as a DVD or VCR) on the remote control, while pointing at the
component. Test the POWER and PR
responds properly. If not, the remote requires programming to operate the device.
2. Turn on the component to be programmed, then press the corresponding mode
button (such as a DVD or VCR) on the remote control. The remote control button
of desired device is lighted.
3. Press the MENU and MUTE buttons simultaneously, the remote control is ready to
be programmed for the code.
4. Enter a code number using the number buttons on the remote control.
Programming code numbers for the corresponding component can be found on
the following pages. Again, if the code is correct, the device will turn off.
5. Press the MENU button to store the code.
6. Test the remote control functions to see if the component responds properly. If not,
repeat from step 2.
buttons to see if the component
D D / E E