Introduction
Introduction
Remote Control Key Functions
Remote Control Key Functions
Installing Batteries
1
Open the battery compartment
cover on the back side.
2
Insert two 1.5V AA size batteries
in correct polarity (+ with +, - with
-). Don't mix old or used batteries
with new ones.
3
Close the cover.
* Dispose of used batteries in the recycle bin to prevent environment.
Wall Mount: Horizontal installation
For proper ventilation, allow a clearance of 4" on each side and from the wall.
Detailed installation instructions are available from your dealer, see the optional
Tilt Wall Mounting Bracket Installation and Setup Guide.
Desktop Pedestal Installation
For proper ventilation, allow a clearance of 4" on each side and from
the wall.
10
TV
INPUT
POWER
DVD
MODE
CABLE
* Use a remote control at 7
meter distance and 30 degree
(left/right/up/down) within the
receiving unit scope.
4 inches
4 inches
4 inches
4 inches
4 inches
4 inches
4 inches
4 inches
4 inches
4 inches
4 inches
4 inches
4 inches
4 inches
4 inches
4 inches
4 inches
4 inches