Vcr Setup - LG LCD TV / LED LCD TV Owner's Manual

VCR SETUP

avoid picture noise (interference), allow adequate distance between the VCR and TV.
To
Connecting with a RF Cable
ANT OUT
Connect the socket of the VCR to the
➊
Connect the terrestrial antenna cable to the
➋
PLAy
Press the button on the VCR and match the appropriate channel between the TV and VCR for viewing.
➌
Connecting with a RCA Cable
AUDIO/VIDEO
Connect the
➊
(Video = yellow, Audio Left = white, and Audio Right = red)
Insert a video tape into the VCR and press
➋
owner's manual.)
AV2
Select input source using the
➌
NOTE
►
If you have a mono VCR, connect the audio cable from the VCR to the
L/MONO
jack of the TV.
ANTENNA IN
ANT IN
socket of the VCR.
➊
Terrestrial
➋
Wall jack
Terrestrial Antenna
jacks between TV and VCR. Match the jack colours
PLAy
on the VCR. (Refer to the VCR
INPUT
button on the remote control.
socket on the TV.
AV IN 2
AUDIO
➊
GB-21