STAND INSTALLATION
■
Image shown may differ from your TV.
When assembling the desk type stand, check whether the bolt
is fully tightened. (If not tightened fully, the product can tilt
forward after the product installation.) If you tighten the bolt
with excessive force, the bolt can deviate from abrasion of the
tightening part of the bolt.
➊
Carefully place the TV screen side down on a cushioned
surface to protect the screen from damage.
M4 x 22
➋
Assemble the parts of the
M4 x 24
Base
of the TV.
M4 x 22
M4 x 22
M4 x 22
M4 x 24
M4 x 24
M4 x 22
M4 x 24
(only 32LE5***)
M4 x 22
M4 x 24
(only 42LE5***)
M4 x 24
Assemble the TV as shown.
➌
M4 x 24
Assemble the parts of the
➍
Fix the 4 bolts securely using the holes in the back of the
➎
TV.
Stand Body
Stand
with the
Stand Body
Stand Base
M4 x 22
Stand Rear Cover
with the TV.
Stand Rear
Cover
M4 x 16
M4 x 16
M4 x 16
M4 x 16
BACk COVER FOR WIRE
ARRANGEMENT
■
Image shown may differ from your TV.
Secure the power cord with the
➊
back cover.It will help prevent the power cable from being
removed by accident.
Cable Holder
After connecting the cables as necessary,install
➋
Holder
as shown and bundle the cables.
ATTACHING THE TV TO A DESk
■
Image shown may differ from your TV.
The TV must be attached to desk so it cannot be pulled in
a forward/backward direction, potentially causing injury or
damaging the product. Use only an attached screw.
1 -Screw
( provided as parts of the product)
Stand
Desk
WARNING
To prevent TV from falling over, the TV should be securely
►
attached to the floor/wall per installation instructions.
Tipping, shaking, or rocking the machine may cause
injury.
Cable Holder
on the TV
Cable
Cable Holder
GB-