Panasonic TX-L42DT50Y Operating Instruction page 40

Menu Item
Mode
Bass
Treble
Equaliser
Balance
Headphone Volume
Surround
Auto Gain Control
Volume Correction
Speaker Distance to
Wall
MPX
40
Adjustments / Configurations (alternatives)
Selects your favourite sound mode [Music] / [Speech] / [User]
The selected mode affects all input signals.
[Music]:
Improves sound quality for watching music videos, etc.
[Speech]:
Improves sound quality for watching news, drama, etc.
In Music and Speech modes, you can adjust [Bass] and [Treble] settings, and
those settings will be stored for each mode.
[User]:
Adjusts the sounds manually by using the equaliser to suit your favourite sound
quality.
For the User mode, [Equaliser] will appear on the Sound Menu instead of [Bass]
and [Treble]. Select [Equaliser] and adjust the frequency.
[Equaliser] (see below)
Adjusts level to enhance or minimise lower, deeper sound output
Adjusts level to enhance or minimise sharper, higher sound output
Adjusts the frequency level to suit your favourite sound quality
This function is available when [Mode] is set to [User].
Select the frequency and change the frequency level by using the cursor button.
To enhance the bass sound, raise the level of the lower frequency. To enhance
the treble sound, raise the level of the higher frequency.
To reset the levels of each frequency to the default settings, select [Reset to
Defaults] by using the cursor button, and then press the OK button.
Adjusts volume level of right and left speakers
Adjusts the volume of the headphones
Surround sound settings
[Off] / [V-Audio] / [V-Audio Surround] / [V-Audio ProSurround]
[V-Audio]:
Provides a dynamic enhancer of width to simulate improved spatial effects.
[V-Audio Surround]:
Provides a dynamic enhancer of width and depth to simulate improved spatial
effects.
[V-Audio ProSurround]:
Provides a more progressive enhancer and reverberation to simulate improved
spatial effects.
Switching is also possible by the SURROUND button on the remote control
(p. 10).
Automatically regulates large sound level differences between channels and
inputs [Off] / [On]
Adjusts the volume of individual channel or input mode
Compensates for the low frequency sound due to the distance between the
speakers and the wall [Over 30cm] / [Up to 30cm]
If the back space between the TV and wall is over 30 cm, [Over 30cm] is
recommended.
If the back space between the TV and wall is within 30 cm, [Up to 30cm] is
recommended.
Selects multiplex sound mode (if available)
[Stereo]: Use this normally.
[Mono]: When stereo signal cannot be received.
[M1] / [M2]: Available while mono signal is transmitted.
For Analogue mode