Deleting Part Of A Scene (Avchd) - Panasonic HC-V700 Operating Instructions Manual

Deleting part of a scene (AVCHD)

Unnecessary part of an AVCHD scene can be deleted.
The deleted scenes cannot be restored.
≥ Change the mode to
AVCHD scene. (l 31)
1
Select the menu.
: [EDIT SCENE] # [SECTION DELETE]
MENU
2
Touch the scene with a part to delete.
3
Set the section to delete by touching and
sliding the top and bottom section selection
buttons .
≥ It is convenient to use Slow-motion Playback and Frame-by-
frame Playback. (l 80)
4
Touch [ENTER].
5
Confirm (play back) the scene after editing by touching [YES].
≥ A confirmation message appears when [NO] is touched. Proceed to Step 7.
6
Stop the playback.
≥ A confirmation message appears.
7
Touch [ENTER].
≥ Repeat steps 2-7 to continuously delete parts from other scenes.
≥ Deleting of part cannot be performed when there are 99 scenes in a single date.
≥ It may not be possible to delete part of a scene with a short recording time.
≥ The scene will be divided into two scenes when middle part of a scene is deleted.
≥ The relay information is deleted when part of a scene that was relay recorded is deleted,
making it impossible to perform the Relay scene combining. (l 99)
and touch the play mode select icon. Then, select the
0h00m15s 0h00m15s 0h00m15s
95
VQT3Y48