Using an USB device
1. Open the USB cover.
2. Connect the USB device.
3. Adjust the volume.
Using an USB device
Moving to another drive
When connecting this unit to multi reader, press BAND (BAND/ DRV on remote
control) to go to the next drive. Each time you press the button, the driver
modes changes.
Quick search of a desired file
You can select and play a desired file regardless of the order in USB.
1. Press ENTER (Or the volume knob) to check all files.
2. Rotate the volume knob on unit or press
select a desired file.
3. Press ENTER (Or the volume knob) to start playback.
Note
• Press and hold ENTER (Or the volume knob) to check all folders. Then, repeat
the previous the steps from 1 to 3 for playing a desired file.
• If the USB device is already connected, press SRC (SRC on remote control.)
to select a source to USB.
• Other functions are same with "Listening to a CD - more you can do".
Refer to page 10.
14
CAR CD/MP3/WMA Receiver
ON PLAYER
ON REMOTE
-
-
-
-
Rotate the
VOLUME
volume knob
- more you can do
v
or
V
on the remote control to
Recording to USB from CD or FM tuner
1. Open the USB cover and connect it to the unit.
2. Select CD or FM tuner.
3. Start playback.
4. Press REC to start recording.
For one track CD recording, press it once.
For all tracks recording, press and hold it until the beep is heard.
5. Press it again to stop.
Note
• Only in CD and FM tuner, recording is available.
• Do not remove the USB device during recording, or an incomplete file may be
made and not deleted on PC.
• When USB memory is full, "Memory Full" displays and stops recording.
• For tuner recording, the broadcastings are recorded by 20 moments on a file
name.
• For all track recording, all tracks of only a selected folder are recorded if there
is more than one folder in CD.
Look out for the followings
• Do not extract the USB device while in operation.
• For a large capacity USB, it may take longer than a few minute to be searched
• To prevent data loss, back up all data.
• If you use a USB extension cable or USB hub, the USB device is not recog-
nized.
• Using NTFS file system is not supported. (Only FAT(16/32) file system is
supported.
• External HDD, Card readers, Locked devices, or hard type usb devices are
not supported.
• USB port of the unit cannot be connected to PC. The unit can not be used as
a storage device.