Nexgrill 720-0719R Use & Care Manual page 11

6. Tool Storage Slide Assembly
Draw Tool Storage Front Panel forward, and insert two Tool
Storage Slides (R) through the slots in tabs on Front Left
and Front Right Cart Legs. Remove the Round Head
Screw from each Cart Leg. Use these Screws to attach
forward loophole ends of Slides to Cart Legs. See Fig. 12.
7. Cart Beam, Front and Cart Beam Back Assembly
a). Use 4AA Round Head Screws and 4 BB Lock Washers
to connect the Cart Beam, Front (S) to Front Left Cart Leg
(B) and Front Right Cart Leg (G). See Fig. 13.
NOTE : Attach Cart Beam so that flat surface in on Cart
exterior.
b). Use 4 AA Round Head Screws and 4 BB Lock Washers
to connect the Cart Fame, Back (T) to Back Left Cart Leg
(C) and Back Right Cart Leg (H). See Fig. 13.
Fig.12
P
Fig.13
B
DD CC
11
R
C
S
T
H
G