Step 3: Hook Up - JVC UX-EP25 Instructions Manual

Step
3
Hook Up
If you need more detailed information, see page 7.
Illustrations of the input/output terminals below are typical examples.
When you connect other components, refer also to their manuals since the terminal names actually printed on the
rear may vary.
Turn the power off to all components before connections.
For better FM/AM reception
Outdoor FM
antenna
(not supplied)
Disconnect the supplied FM antenna, and connect to an outdoor FM
antenna using a 75 Ω wire with coaxial type connector.
5
To a wall outlet
Plug the AC power cord only after all connections are complete.
Vynil-covered wire (not supplied)
Extend it horizontally.
AM loop antenna
Keep it connected.