Using The Direct Attach Method; Using The Remote Browser Method - HP ProLiant ML310 User Manual

Direct attach
Remote browser
Remote desktop
HP Integrated
Lights-Out 2 (iLO 2)
For more information, see
IMPORTANT:
An IP address can be substituted for a storage server's serial number and hyphen when using either
remote browser or remote desktop methods to access the HP Storage Server Management console. For
example: 192.0.0.1 can be substituted for TWT08466-.

Using the Direct attach method

You can access the HP Storage Server Management console using a monitor, mouse, and keyboard
directly attached to the storage server.
To connect the storage server to a network using the direct attach method
1.
Log in to the HP ProLiant Storage Server with the default user name administrator and the
password hpinvent.
The HP ProLiant Storage Server Management console and Rapid Startup Wizard will start
automatically.
NOTE:
You can change the administrator name and password when you configure the server
using the
2. To complete network configuration using the Rapid Startup Wizard, see
the network" on page 25.

Using the Remote browser method

The storage server ships with DHCP enabled on the network port. If the server is placed on a
DHCP-enabled network and the serial number of the device is known, the server can be accessed through
a client running Internet Explorer 5.5 (or later) on that network, using the TCP/IP 3202 port.
IMPORTANT:
Before you begin this procedure, ensure that you have the following:
• Windows-based PC loaded with Internet Explorer 5.5 (or later) on the same local network as the
storage server
• DHCP-enabled network
• Serial number or IP address of the storage server
To connect directly to the storage server without using the network.
To establish a browser-based connection to the HP ProLiant Storage
Server Management console from a remote client running Internet
Explorer 5.5 (or later).
To establish a connection from a remote client without using a browser.
This method requires the client to have Windows remote desktop
capability.
To establish a browser-based connection from a remote client using
the iLO 2 interface.
"Planning for
"Rapid Startup Wizard" on page 26.
installation" on page 15.
"Configuring the server on
HP ProLiant ML310 Storage Server 19