Setting Up Your Display; Connecting The Cables - HP D2830A User Manual

HP Ergo 1024 User's Guide

Setting Up Your Display

Setting Up Your Display
Where to Place the Display
Place your display on a flat sturdy surface.
Ensure the operating site is free from excessive heat, moisture, and sources of
electromagnetic fields. Sources of electromagnetic fields include
transformers, motors, and other displays.

Connecting the Cables

Before you connect any cables, refer to the safety instructions at the
beginning of this manual and make sure your PC and display are switched off.
1 Connect the video cable (it has a 15-pin plug) to the video outlet on
your PC and to the display. Tighten the thumbscrews on the plug.
2 Connect the power cord to the display.
3 Plug the power cord into the power outlet.
1
Video cable
(15-pin plug)
2
3
Power cord
NOTE The location of your PC's video outlet may be different to the one shown
in the diagram. Refer to the manual that came with your PC, if
necessary.
4 English