LG LCD TV / LED LCD TV /PLASMA TV Owner's Manual page 31

NOTE
If the TV scans a blocked programme, you
y
will be prompted to enter your password to
keep the programme scanned.
You can store up to 1,000 programmes. The
y
number of programmes that you can store
differs depending on the broadcasting signal
environment.
Automatic Numbering: Decide whether
y
to use the programme numbers as sent by
broadcasting stations for tuning.
When select Italy in the Country menu, if the
y
pop up is displayed when the conflicted pro-
gramme after Auto Tuning, select a broad-
caster for conflicting programme number to
solve.
In the following country, DVB cable can be
y
used : Germany, Netherlands, Sweden,
Switzerland, Denmark, Austria, Finland,
Norway, Slovenia, Hungary, Ukraine, Ireland,
Poland, Romania, Spain, Bulgaria, Russia,
Lithuania, Estonia, Latvia. (The supported
country can be added.)
In the following country, Digital TV can not
y
be used : Bosnia, Kazakhstan. (Only Plasma
TV).
Selecting Cable,
1
Press Home to access the main menus.
2
Press the Navigation buttons to scroll to
SETUP and press OK.
3
Press the Navigation buttons to scroll to
Auto Tuning and press OK.
4
Press the Navigation buttons to scroll to
Cable and press OK.
5
Press the Navigation buttons to scroll to
Comhem or Other Operators and press OK.
6
Press the Navigation buttons to scroll to
Quick or Full and press OK.
7
Press the Navigation buttons or Number but-
tons to scroll make appropriate adjustments
(Except for Full mode) and press OK.
8
Press the Navigation buttons to scroll to
Close and press OK.
9
Select Start to start automatic tuning.
The TV scans and saves available pro-
grammes automatically.
10
When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
NOTE
If the TV scans a blocked programme, you
y
will be prompted to enter your password to
keep the programme scanned.
When you select the Cable, the Cable
y
Service Operator selection screen can differ
or not exist by the Cable situation of the ap-
plicable country.
The popup window to select Service Opera-
y
tor is only shown initially for the 3 cases
when you accessing the Initial Setting
menu, when you change from Antenna to
Cable or when you access the menu after
changing the Country.
When you want to select Service Operator
y
aside from the above 3 cases, you can do so
by selecting Setup->Cable DTV Setting->
Service Operator.
31
WATCHING TV