Care And; How To Dismantle Parts - LG SXS Refrigerator Owner's Manual

Freezer
compartment
lamp
Refrigerator
compartment
lamp
Freezer
compartment
shelf
Door rack and
support
Ice storage bin
(Applicable to
some models only)
After dispenser is
used
(Applicable to
some models only)
32 32

How to dismantle parts

NOTE
• Dismantle by reversing the assembly instructions. Be sure to unplug the power
plug before dismantling and assembly. Never apply severe force to dismantle
parts. Parts may be damaged.
Separate the lamp by pulling it out
slightly pressing and rotating
Turn the bulb counterclockwise. Use a 40-watt
bulb(max.) which can be purchased at a service
centre.
To remove the lamp cover, press the protrusion under the lamp cover to the
front and then pull the lamp cover out.
Turn the bulb counterclockwise. Max. 40 W bulb for refrigerator is used and
can be purchased at a service centre.
NOTE
• Not all bulbs will fit your refrigerator.
Be sure to replace the bulb will one of the same size, shape and wattage.
• The dispenser lights are LEDs that can not be changed.
To remove a shelf, push the shelf to the left
,lift the left part of the shelf a bit , lift the right
part up , and take it out.
Lift the door rack holding both sides
it out .
Hold the ice storage bin as shown in the right
figure and pull it out while slightly lifting it .
▪ Do not dismantle the ice storage bin unless it
is necessary.
▪ Use both hands to remove the ice bin to avoid
dropping it.
The water collector has no self-draining
function. It should be cleaned regularly.
First take out the water collector cover.
Press the cover where PUSH marked
lift the water collector cover up.
Take out the water collector cover as
illustrated .
Remove the cover by pulling the front side
of water collector cover and dry it with a
cloth.
Pull the cover fully to the front
it out. Clean the base and cover with a
dry cloth.
Care and maintenance
while
the lamp cover.
and pull
OPTION 1
to
OPTION 2
and pull
Care
R
(A
(A
(A
(A
(A