To Dry Iron - Hamilton Beach 14975 Instruction Manual

840153100 Ev01.qxd 5/18/06

To Dry Iron

1. Plug the iron into outlet.
2. Set Steam ON/OFF Control to
O (Dry Iron).
3. Turn Temperature Control Dial to
desired temperature. Allow 2 minutes
for iron to reach desired temperature.
4. To turn iron Off, turn Temperature
Control Dial to OFF and unplug iron.
To Steam Iron
1. Unplug iron. Set Steam ON/OFF Control to O (Dry Iron) Set
iron upright on heel rest. Open water fill cover.
2. Using a cup, slowly pour tap water into water tank opening
until MAX fill line is reached. Do not fill iron directly from
the faucet.
3. Plug iron into outlet.
4. Turn Temperature Control Dial to desired fabric setting in
the steam range.
2:36 PM Page 6
6
5. Allow 2 minutes for the iron to reach desired temperature.
6. Set Steam ON/OFF Control to
7. To turn iron off, set Set Steam ON/OFF
Control to O (Dry Iron). Turn the
Temperature Control Dial to Off.
Unplug iron.
8. Empty water from the iron following
directions in "Caring for Your Iron."
Water: Please use ordinary tap water. If you have extremely
hard water, alternate between tap water and distilled water
for use in the iron.
To Vertical Steam
1. Follow Steps 1 through 5 in
"To Steam Iron."
2. Hang garment in a location that is
not susceptible to damage from heat
or moisture. Do not hang in front of
wallpaper, window, or mirror.
3. Hold iron about 6 inches (15 cm) away
from garment and press and release
the Blast Button to steam out wrinkles. Do not press Blast
Button more than once every 5 seconds.
4. To turn iron off, turn Temperature Control Dial to OFF.
Unplug iron.
5. Empty water from the iron following directions in "Caring
for Your Iron."
NOTE: Do not allow hot soleplate to touch delicate garments.
.
7