The Electronic Programmer - Ariston XC 902 GH DC AUS Instructions For Use And Installation

Table of Contents

Advertisement

The electronic programmer has the function of
automatically switching on the oven (at the required time)
and switching it off at the end of the set cooking time. The
4 figure luminous display showing the actual time and the
programming times, also shows the current state of the
oven by means of the following symbols:
Oven on
Minute minder
Automatic programme AUTO
Point • (this divides the hour from the minutes on the
display)
All the functions may be programmed for a total of 23 h
and 59 min. Maximum cooking time is 10 hours.
Adjusting the clock
(At installation, after power failures, clock in advance or
behind).
Select manual mode by pressing key
and minutes using the -and + keys.
Manual oven mode (Programming excluded)
Press the key
; and the oven is switched on, the AUTO
symbol goes out and the
This operation erases any set programme.
Semi-automatic oven mode
1st example: start in manual cooking mode - programmed
cooking time.
Put the food to be cooked in the oven.
Press the
key (duration) and adjust the cooking
time using the -and + keys: the oven switches on, the
AUTO and
(oven on) symbols light up.
Turn the selector and the thermostat knobs onto the
required function and temperature respectively.
At the end of the set cooking time, the oven is
automatically switched off, the symbol
goes out and the AUTO symbol blinks; an acoustic signal
sounds.
2nd example: start with manual cooking mode - end with
programmed cooking mode.
Put the food to be cooked in the oven.
Press the
key (end of cooking) and adjust the end
of cooking time using the - and + keys: the oven switches
on, the AUTO and
Turn the selector and the thermostat knobs onto the
required function and temperature respectively.
At the end of cooking, the oven is automatically switched
off, the
symbol (oven on) goes out and the AUTO
symbol blinks; an acoustic signal sounds.

THE ELECTRONIC PROGRAMMER

, adjust the hour
(oven on) symbol comes on.
(oven on)
symbols light up.
Automatic oven mode (programmed cooking duration and
end)
Put the food to be cooked in the oven.
Press the key
time using the - and + keys: the AUTO and
symbols light up (the oven switches on).
Press the key
of cooking time using the - and + keys: the
goes out (the oven switches off).
Turn the selector and the thermostat knobs onto the
required function and temperature respectively.
The programmer automatically sets the start of cooking
time, which is shown by the symbol
on. When the cooking time has elapsed, the oven is
automatically switched off, the
out and the AUTO symbol blinks; an acoustic signal
sounds.
Minute minder
Press the
key (minute minder) and set the time required
using the - and + keys. An acoustic signal sounds at the
end of the programme.
Buzzer
The buzzer emits a sound for 7 minutes after the end of
the selected programme; it may be stopped by pressing
any function key. It is possible to choose 3 different types
of acoustic signal. By pressing the - key the actual signal
tone appears. Now, within 7 seconds, every further press
of the - key changes the signal tone.
Program control
Press the key
for the remaining time to be displayed,
and the key
to check the end of cooking time.
Erasing programs
Once a programme has been carried out, it is automatically
erased; it can also be cancelled by pressing the key
(manual).
6
(Duration) and adjust the cooking
(end of cooking) and adjust the end
(oven on) coming
(oven on) symbol goes
(oven on)
symbol
AUS

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents