Advertisement
Available languages
Available languages
INSTALLATION INSTRUCTIONS
Locate existing wiring to avoid drilling into or severing wiring
during installation.
5. Route the flexible cable conduit from the microwave oven to
the junction box through a UL listed or CSA approved conduit
connector.
6. Tighten screws on conduit connector.
7. See "Electrical Connection
Options Chart" to complete
installation for your type of electrical connection.
Excessive Weight Hazard
Use two or more people to move and install
microwave oven.
Failure to do so can result in back or other injury.
2. To avoid floor damage, set the microwave oven onto
cardboard prior to installation. Do not use handle or any
portion of the front frame for lifting.
3. Remove the shipping materials and tape from the microwave
oven.
4. Remove and set aside racks and other items from inside the
microwave oven.
5. Remove the hardware package from inside the bag
containing literature.
6. Move the microwave oven and cardboard close to the
microwave oven's final location,
El®ctdccl Co['
®ctio
Electrical Shock Hazard
Disconnect power before servicing.
Use 12 gauge copper wire.
Electrically ground oven.
Failure to follow these instructions can result in death,
fire, or electrical shock.
This microwave oven is manufactured
with a neutral (white)
power supply wire and a cabinet-connected
green (or bare)
ground wire twisted together.
1. Disconnect
power.
2. Feed the flexible cable conduit from the microwave oven
through the opening in the cabinet.
3. Remove junction box cover if it is present.
4. Install a UL listed or CSA approved conduit connector to the
junction
box.
A. UL listed or CSA approved conduit connector
Electrical
Connection
Options Chart
If your home has:
Go to section:
4-wire
4-wire Cable from Home
Power Supply
1/2"
3-wire
3-wire Cable from Home
Power Supply
1/2"
)
4-Wire Cable from Home Power Supply
IMPORTANT:
Use the 4-wire cable from home power supply in
the U.S. where local codes do not allow grounding through
neutral, New Branch circuit installations (1996 NEC), mobile
homes and recreational vehicles, new construction
and in
Canada.
;JH
"%
i
L_
A. Cable from home power supply
B. Black wires
C. Red wires
D. 4-wire flexible cable from
microwave oven
E. Junction box
F. White wires
G. UL listed wire connectors
H. Green (or bare) ground wires
I. UL listed or CSA approved
conduit connector
1.
2.
3.
4.
5.
Connect the 2 black wires (B) together using a UL listed wire
connector.
Connect the 2 red wires (C) together using a UL listed wire
connector.
Untwist white wire from green (or bare) ground wire coming
from the microwave oven,
Connect the 2 white wires (F) together using a UL listed wire
connector.
Connect the green (or bare) ground wire (H) from the oven
cable to the green (or bare) ground wire (in the junction box)
using a UL listed wire connector.
6. Install junction box cover.
Advertisement
