Parts And Features; Anti-Scale Mesh Filter; Using Your Electric Kettle - Hamilton Beach 40886 Instruction Manual

840109000 Ev01.qxd 2/21/03 2:29 PM Page 4

Parts and Features

1. Lid

2. Anti-Scale Mesh Filter

(inside spout)
3. Power Base
Anti-Scale Mesh Filter
Scale is caused by lime and calcium in hard water. The mesh
filter will prevent these suspended particles from being poured
out of the kettle. To ensure optimum performance of the filter
it should be periodically cleaned. To clean the filter, rinse it
under running water and brush with a soft brush. An old,
clean toothbrush works well.
4. Power Switch
5. Water Window
6. Cord Wrap (can exit to left
or right of handle)
4

Using Your Electric Kettle

BEFORE FIRST USE: Remove plastic bag from outside
kettle and any packaging that may be inside the kettle. Fill
the kettle to the MAX indicator on water level window and
bring to a boil until kettle shuts off automatically. Discard
water and repeat the process. Rinse out the kettle 2 or 3
times. The kettle is now ready for use.
1. Remove from power base before filling.
2. Fill the kettle with the required amount of water. Ensure that
the water level is between MIN and MAX on the water level
indicator. If using the mesh filter, it must be in place.
WARNING: If the kettle is overfilled there is a risk that
boiling water may spit out of the spout.
3. Make sure that the lid is in place and the kettle or power
base (cordless models only) is standing on a level surface.
If lid is not in place, auto shut-off will not operate.
4. Plug into the outlet and turn on (l).
5. The kettle will switch off (O) automatically when the water
has boiled. (Remember, the surface of the kettle gets hot;
take care–only grip the kettle by the handle).
6. After use, unplug the kettle and empty.
NOTE: Use water only. If used for foods other than water, the
warranty will be voided.
5