Clock and Timer ...... En- Network Setup ......En- Thank you for purchasing an Onkyo Wireless Music System. Please read this manual thoroughly before making any connections and plugging it in. Following the instructions in this manual will enable you to obtain...
WARNING: WARNING AVIS RISK OF ELECTRIC SHOCK RISQUE DE CHOC ELECTRIQUE TO REDUCE THE RISK OF FIRE OR ELECTRIC DO NOT OPEN NE PAS OUVRIR SHOCK, DO NOT EXPOSE THIS APPARATUS The lightning flash with arrowhead symbol, within an TO RAIN OR MOISTURE. equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage”...
Part 15 of FCC Rules. Operation is subject to the are wet or damp. If water or any other liquid gets following two conditions: (1) this device may not cause inside this unit, have it checked by your Onkyo interference, and (2) this device must accept any dealer.
Page 4
For European Models IC Statement Hereby, ONKYO SOUND & VISION CORPORATION, declares that this ABX-N300 is in compliance with the Changes or modifications not expressly approved by the essential requirements and other relevant provisions of party responsible for compliance could void the user’s Directive 1999/5/EC.
že ABX-N300 a spĺňa základné požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES. ONKYO SOUND & VISION CORPORATION izjavlja, da je ta ABX-N300 v skladu z bistvenimi zahtevami in drugimi relevantnimi določili direktive 1999/5/ES. ONKYO SOUND & VISION CORPORATION vakuuttaa täten että ABX-N300 tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä...
Off (disabled) ..........25 iPod/iPhone Models that can be Connected... 9 Using the Snooze Function......25 Caution ............9 Using the Sleep Timer .........25 Getting to Know the ABX-N300...... 10 Network Setup ..........26 Top/Front Panel........... 10 Network Essentials ........26 Rear Panel........... 11 Connecting via Wireless LAN ......27...
❏ Super Bass (S.Bass) function for deeper bass sounds The lithium button battery (CR2025) is already installed ❏ Line input for external audio source in the remote control when you purchase the ABX-N300. ❏ Downlight with adjustable dimmer ❏ 2 programmable timers ❏...
Polarity indication • If another remote controller of the same type is used in CR2025 the same room, or the ABX-N300 is installed close to Battery model equipment that uses infrared rays, the remote number Latch controller may not work reliably.
Caution By attaching an interchangeable part called a dock adapter, you’ll be able to insert your model of supported • If you connect an iPod/iPhone to the ABX-N300 iPod/iPhone. without attaching a dock adapter, you risk straining • Use a commercially available dock adapter or the one and damaging the connector.
Network standby indicator (30) select a menu item. If the standby mode is set to “Network,” this indicator will light orange when the ABX-N300 is ENTER button (17– 20) in standby mode. Press this button to confirm a setting you’ve made in Stand a menu, etc.
About Installation The ABX-N300 features a speaker bass reflex duct on each side panel. Allow a space of 20 cm or more on each side to avoid blocking the bass sound.
The information (album title, artist name) shown in the display will change each time you press this button. If you press this button when the ABX-N300 is in standby mode, the clock will be displayed for eight seconds. INPUT []/[] button (14, 17, 18, 20, 22) This button selects the source that will be heard.
White Headphones Game console Television Record player with built-in phono equalizer Caution If you connect the earphone jack of another device to the ABX-N300’s LINE IN jack, you must first adjust the volume of the connected device.
Turning On the ABX-N300 To mute the ABX-N300, press the remote controller’s [MUTING] button. To turn on the ABX-N300, press the [] button on the “Muting” will appear on the display. ABX-N300 or remote controller. To unmute the ABX-N300, press the [MUTING] button The power will turn on, and the downlight located in the again.
• If headphones are connected, no beep will be heard The value of the Bass setting will blink. when you operate the touch screen of the ABX-N300. • While the headphones plug is inserted in the Use the []/[] buttons to adjust the value.
If you • If you use a case with your iPod/iPhone, always insert it into the ABX-N300 dock in this state, you’ll remove it before you insert it. Otherwise, it may need to wait a few moments before your iPod/iPhone not connect properly and a malfunction may is ready for use.
Cancelling Random Playback Caution To cancel random playback, press the [SHUFFLE] In order to using the AirPlay, the ABX-N300 must be button. connected to a network. For details on connecting to a The symbol will disappear from the screen of the network, refer to “Network Setup”...
ENTER Caution Use the []/[] buttons to select “United In order to listen to Internet radio, the ABX-N300 must Kingdom,” and press the [ENTER] button. be connected to a network. For details on connecting to “United Kingdom” is merely an example. You are a network, refer to “Network Setup”...
“Favorites” or “My Added Stations” in the “Favorites” and “My Added Stations.” ABX-N300’s vTuner menu. Playing Music Files on a Server This section explains how to play music files on a computer or media server through the ABX-N300 (Server Playback). DISPLAY INPUT C/U ENTER...
Page 20
Player 11 Setup ® Start your computer or media server. Start Windows Media Player 11. Start up the ABX-N300, and set the input to On the “Library” menu, select “Media “Media Server.” Sharing.” Press the ABX-N300’s [INPUT] button or use the The “Media Sharing”...
Rocketboost™ (North American models only) The ABX-N300 can play back music from another Typical Rocketboost Applications Rocketboost device (Sender). Rocketboost Wireless Card Ready Send audio from MP3 or PC Installing a Rocketboost Wireless Card (sold separately) enables this product to receive wireless...
ABX-N300 to your Rocketboost network, you need to on the back of the ABX-N300. pair it with your hub device. Note: The ABX-N300 must be in standby mode when you Insert the Rocketboost Wireless Card attach the Rocketboost Wireless Card (WLC-TR1, sold (WLC-TR1, sold separately) to the separately).
While the ABX-N300 is in standby mode, press the [TIMER] button. Press the [ENTER] button. If the ABX-N300 is powered-on, press the [] button to enter standby mode. The setting will be completed, and then the display will return to the standby condition.
(remote controller only) The ABX-N300 provides three different timers: two program timers that can automatically play your iPod/iPhone at the specified time, and a sleep timer that can put the unit in standby mode after the specified duration has elapsed.
10 min.” When the specified duration has elapsed, the Caution power will turn off. In order for the timer to operate, the ABX-N300 must be in standby mode. Checking the remaining time When you press the [SLEEP] button, the display will Cancelling without setting the timer indicate the time remaining until the power will turn off.
A network of this type that is limited to a relatively small area, such as a home, is called a Local Area Network (LAN). If the ABX-N300 is connected to a network server such as a computer, it can play back music files stored on the network server (computer), or connect to the Internet to play Internet radio.
Mode,” and press the [ENTER] button; then operations. use the []/[] buttons to select “Network,” • Network settings are made while the ABX-N300 is in and press the [ENTER] button. standby mode. If the ABX-N300 is powered-on, press the [] button to put it in standby mode.
Tip: If three minutes or longer have passed and the ABX-N300 is still not connected to the network or if the Note: indication “Failed” is displayed, it may be that the If an Ethernet cable is connected, you won’t be able to security type or the security key was not entered select “Wireless.”...
Page 29
Network Setup —Continued Network connections (Manual) Press the [MENU] button. Network Setup Disconnect the AC adapter, then connect the Ethernet cable and wait at least ten Network Info seconds before reconnecting the AC Standby Mode adapter. Beep Press the [MENU] button. Use the []/[] buttons to select “Standby Use the []/[] buttons to select “Standby Mode,”...
Network Info consumption. However when the power is turned on, the Standby Mode ABX-N300’s power will turn on first, and then the Beep network circuitry will be powered and started up; this means that it will take approximately 30 seconds before The IP Address will be displayed.
Editing the name shown in AirPlay Viewing the “WEB Setup Menu” Window You can edit the ABX-N300’s name as it appears on a network such as AirPlay. If the ABX-N300 is connected to the network, you can From the menu in the left side of the “WEB Setup use a computer connected to that network to view and Menu”...
Player 12 The computer or media server must be on the same network as the ABX-N300. Note: Depending on the media server, the ABX-N300 may not recognize it, or may not be able to play its music files. Tip: ®...
ABX-N300, look for a solution in this section. There’s no sound. If a problem occurs with the ABX-N300’s operation, you • Make sure the ABX-N300’s volume is not set too low may be able to solve the problem by resetting the unit. (see page 14).
• Make sure that the router is set correctly. • Power-off the ABX-N300, or disconnect the AC • If the ABX-N300 is connected via a wireless LAN, the adapter. Then turn on the power once again, and state of the radio signal may make it impossible for the connect your iPod/iPhone.
• Use a connection cable that does not contain a built-in resistor. • In some cases you won’t be able to perform operations from the ABX-N300 itself or using the buttons of the No sound is heard from your turntable. remote controller. If so, perform the operations from your iPod touch/iPhone/iPad.