Zenith C27J28C Operating Manual page 21

Setting the V-Chip
J33A0621B_EN.indb 21 J33A0621B_EN.indb 21
To change the password
1
Press MENU/ENTER. The menu screen appears.
2
Press or to select
menu, then press or
"V-CHIP".
3
Press to display the password
entering mode. Use the number
buttons (0-9) to enter your password,
then press MENU/ENTER.
The V-CHIP menu appears.
4
Press or to select "CHANGE
PASSWORD", then press
5
Enter a new password using the
number buttons (0-9), then press
MENU/ENTER.
6
Enter the same password again to
confi rm, then press MENU/ENTER.
7
Press MENU/ENTER repeatedly until the menu screen is cleared.
Otherwise, press EXIT to return to the normal screen immediately.
(continued)
(OPTION)
to select
.
21
1/31/08 5:31:39 PM 1/31/08 5:31:39 PM