Grundig New­York ­55­ CLE ­9170 ­SL User Manual page 71

SpECIAL­SEttINGS
Note:
You can accelerate the search. To do this,
7
you need information about the frequency
and network ID. You are usually able to get
this data from your cable operator or find it
in forums on the Internet. For example, the
frequency 402MHz and network ID 61441
can be entered for Germany.
7 Start the scan with »
– A ll channel and favourites lists will be
d eleted and compiled anew.
Note:
After starting the scan, a security query will
7
appear. Press »
option »Yes«.
– T he »Results« menu appears, and the scan
for TV channels begins. Depending on the
number of television channels received,
this can easily take a few minutes.
– T he scan is complete as soon as the »PRO-
GRAM TABLE« appears.
Note:
You can abort the search by pressing
7
»mENu«.
8 Press »mENu« to end the setting.
­ 7 2
ENGLISH
­ - ---------------------------------------------------------------------------------------------------------
« (red).

« (green) to confirm the

Searching­for­television­channels­
from­the­cable­provider­manu-
ally
1 Open the menu with »mENu«.
2 Select the line »SOURCE SETUP« with »
or » « and press »oK« to confirm.
Λ
– T he »SOURCE SETUP« menu appears.
3 Select the line »Source« with »
and press »oK« to confirm.
Select the option »Cable« with »
» « or » « and press »oK« to confirm.
v Λ
4 Select » Digital Manual Tuning« with »
» « and press »oK« to confirm.
Λ
– T he menu appears.
5 Enter the four-digit frequency with »1­...­0«
and press »oK« to confirm.
– T he search starts after confirming, the
channels found are displayed in the »Re-
sults« menu.
6 Press »mENu« to finish the setting.
«
v
« or » «
v Λ
< >
«, » «,
« or
v