What Does Each Message Mean - Minolta CF911PE User Manual

6. What Does Each Message Mean?

What Does Each Message Mean?
Message
"Waste toner bottle is full"
A door is open"
"The fuser unit oil is empty "
"The fuser unit oil is low"
"XX tray is empty"
"There is a jam ..."
"Paper in Duplex Unit."
"XX tray removed."
"Fuser warming up."
"The fuser is sleeping."
"XX toner is out"
"XX toner is low"
"The waste toner bottle is near
full"
"Plase call tech. Service. Cxxxx" The unit malfunctioned and is
NOTE
For all other messages, see the Appendix A: Printer Messages of the Print Station User Guide.
4-12
Cause
The Waste Toner Collecting Bot-
tle is full and the unit is unable to
produce prints.
A unit door is left open or an
option is not attached properly
and the unit is unable to produce
prints.
The Fuser Oil needs to be replen-
ished and the unit is unable to
produce prints.
The Fuser Oil is running out.
The indicated tray has run out of
paper.
A paper misfeed occurs.
There is paper in the duplex unit. Remove paper from the duplexer.
The indicated paper tray is not
inserted correctly.
The fuser is warming up.
The fuser is in the energy saving
mode.
Toner of the displayed color has
run out and the unit is unable to
produce prints.
This message is displayed when
toner will run out soon.
The waste Toner Collecting Bot-
tle is almost full.
unable to produce prints.
Action
Call your technical representative.
The printer's front door and/or
left door is open. The Printer will
resume printing when the door is
closed.
Call your technical representative.
Call your technical representative.
Load the Tray with correct paper
size . p. 4-1
Clear the misfeed sheet.
Insert indicated paper tray.
Wait till fuser warms up.
Printer will exit energy saving
mode when a print job is started.
Replenish toner. p. 4-3
Replenish toner p. 4-3
Call your technical representative.
Canceled when turning the power
Off and On.
Call and inform your Technical
Representative of the trouble
code message on the screen.