Auto Operation - LG Air Conditioner Owner's Manual

Operating Instructions

Auto Operation

ON
DURING AUTO OPERATION:(UV12NEC)
You can switch the indoor fan speed.
If the system is not operating as desired, manually switch to another mode. The system will not
automatically switch from the cooling mode to the heating mode, or from heating to cooling, then you must
set the mode and the desired temperature again.
DURING AUTO OPERATION:(UV18NBC/UV24NBC)
You can switch the indoor fan speed.
The system will automatically switch from the cooling mode to the heating mode as the room temperature
and set temperature.
12 Convertible Type Air Conditioner
1
Press the Start/Stop button.
The unit will respond with beep
sound.
2
Open the door on the Remote Controller. To select Auto
Operation, press the Operation Mode Selection button.
Each time the button is pressed, the operation mode is
shifted in the direction of the arrow.
3 The temperature and fan speed are automatically set by the
electronic controls based on the actual room temperature.
If you want to change the set temperature, press the Room
Temperature Setting buttons. The set temperature will be
changed considering room temperature.
Cooling Auto
Dehumidification
To raise the temperature
To lower the temperature
Healthy Heating
(Heat pump model only)