La Crosse Technology Weather Station Instruction Manual page 9

Hide thumbs Also See for Weather Station:

Table of Contents

indoor temperature/humidity and the time as 0:00 will be displayed. If these information are not displayed on the

LCD after 60 seconds, remove the batteries from both units and wait for at least 60 seconds before reinserting

them.

The outdoor temperature data

Station. Also, the signal reception icon will be displayed. If this does not happen after 2 minutes, the batteries will

need to be removed from both units and reset from step 1.

Insert the batteries in the second transmitter as soon as the outdoor temperature and humidity readings from the

first transmitter are displayed on the Weather Station.

Note : User shall insert the batteries into the second transmitter within 45 seconds after the Weather Station

displays the information of the first transmitter.

The outdoor temperature

from the second transmitter and the "channel 2" icon should then be displayed on the

Weather Station. If this does not happen after 2 minutes, the batteries will need to be removed from all the units

and reset from step 1.

Insert the batteries in the third transmitter as soon as the "channel 2" icon and outdoor data are displayed on the

Weather Station. Then within 2 minutes, the channel 3 outdoor data from the third transmitter will be displayed

and the channel icon will shift back to "1" once the third transmitter is successfully received. If this is not happen,

user shall restart the setting up from step 1.

from the first transmitter (channel 1) should then be displayed on the Weather

Table of Contents